BME Mini-Switchmode® Capacitors
- High Capacitance, Small SIze
- Low ESR/ESL
- Leadframe reduces thermal & mechanical stress due to board flexure and TCE mismatch
- Green / ROHS Compliant
- DC-DC Converters
- Power Supply Input & Output Filters
- High Capacitance Applications Where Increased Reliability is Required
| Technology | Chips | Volts | Max. Cap. |
| PME | 1x 1825 | 50V | 1.2μF |
| BME | 1x 1812 | 50V | 4.7μF |
| PME | 2x 2225 | 100V | 4.4μF |
| BME | 2x 2220 | 100V | 10μF |
This new series of miniature switchmode power supply filter capacitors uses BME (Base Metal Electrode) construction to achieve 300-400% capacitance increases and component size reductions compared to their PME (Precious Metal Electrode) counterparts per the examples below.
Capacitance / Voltage |
Case Size / Part Number |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacitance Rating |
DC Voltage Rating |
Size P0A 1812 Single Stack |
Size P07 2220 Single Stack |
Size P2A 1812 Double Stack |
Size P27 2220 Double Stack |
|||||
| 2.2 μF | 100V | 101P0AW225MJ4U+RC | ||||||||
| 4.7 μF | 50V | 500P0AW475MJ4U+RC | ||||||||
| 4.7 μF | 100V | 101P07W475MJ4U+RC | 101P2AW475MJ4U+RC | |||||||
| 10 μF | 50V | 500P07W106MJ4U+RC | 500P2AW106MJ4U+RC | |||||||
| 10 μF | 100V | 101P27W106MJ4U+RC | ||||||||
| 22 μF | 50V | 500P27W226MJ4U+RC | ||||||||
| Size P0A | Size P07 | Size P2A | Size P27 | |||||||
| Dimensions | in. | mm | in. | mm | in. | mm | in. | mm | ||
| L Max | 0.217 | 5.5 | 0.256 | 6.5 | 0.217 | 5.5 | 0.256 | 6.5 | ||
| W Max | 0.157 | 4.0 | 0.217 | 5.5 | 0.157 | 4.0 | 0.217 | 5.5 | ||
| H Max | 0.118 | 3.0 | 0.118 | 3.0 | 0.236 | 6.0 | 0.236 | 6.0 | ||
 |
 |
|||||||||
| All Components | in. | mm | ||||||||
| h1 Typ. | .059 | 1.50 | ||||||||
| c Typ. | .100 | 2.54 | ||||||||
| p1 Typ. | .020 | 0.50 | ||||||||
| p2 ± 0.02 | .065 | 1.65 | ||||||||
| OPERATING RANGE: | -55 to +125°C | ||
| TEMPERATURE COEFFICIENT: | X7R, ±15% | ||
| DISSIPATION FACTOR: | 0.020 (2.0%) max. | ||
| AGING RATE: | 2.5% per decade | ||
| INSULATION RESISTANCE: | 2.5 X WVDC for 50 VDC | ||
| WITHSTANDING VOLTAGE: | 2.0 X WVDC for 100 VDC | ||
| TEST CONDITIONS: | 1kHz ±50Hz; 1.0±0.2 VRMS, 25°C |
| Part number written: 500P07W106MJ4U+RC | ||||||||||||||||
| 500 | P07 | W | 106 | M | J | 4 | U | +RC | ||||||||
| VOLTAGE | SIZE | DIELECTRIC | CAPACITANCE | TOLERANCE | TERMINATION | MARKING | PACKING | ROHS CODE | ||||||||
| 500 = 50 V 101 = 100 V |
See Chart | W = X7R | 1st two digits are significant; third digit denotes number of zeros. 225 = 2.2 μF 106 = 10 uF |
M = 20% | J = “J” Leads (formed in) |
4 = Unmarked | U = Embossed Tape 13” Reel per EIA RS481 |
|||||||||