Untitled Document

Features:

  • Optimized for Power Handling
  • Superior Lead-free Solder Reflow Performance: MSL=1.0
  • Green / ROHS Compliant
  • Polyterm® Terminations available

Applications:

  • Superior Film Cap Replacement
  • Florescent and HID Lighting Ballasts
  • Industrial Controls
  • Networking
Typical Power Ratings vs Chip Size
EIA SizeJDI SizeRated Power
1206R180.08 W
1210S410.20 W
1812S430.40 W
High Voltage AC Power Ceramic Capacitors

Typical ESR 1KV 1812 NP0

Typical ESR 1KV 1812 NP0

Typical Ripple Current 1KV 1812 NP0

Typical Ripple Current 1KV 1812 NP0

Ripple current calculation data was obtained using the test circuit shown with 50 ohm load. Typical ripple current values were calculated based on the power level at a given frequency required to raise the capacitor’s temperature by 50 °C (from 25°C ambient to 75°C.)

Typical Ripple Current Design

Dissipation Factor vs AC Volts, X7R

Dissipation Factor vs AC Volts, X7R

Capacitance vs AC Volts, X7R

Capacitance vs AC Volts, X7R

Capacitance Values

AC power Capacitance selection chart
How to Order

Valid options are shown except for Capacitance
A typical PN is ACDP102W102K1GV001B. This part number breaks down as follows:

AC Power Capacitors, 1808, X7R cap, 1,000.0V, 1,000.00pF±10% cap, Ni/Sn (RoHS) cap, Bulk cap


New Johanson Global Part Number Breakdown

* Not all combinations create valid part numbers, ask our Apps Engineering Team for assistance creating a valid part number Request for assistance


Click below to see the new Global Part Number Reference Chart for this product

Legacy How to Order Information