Johanson offers a wide range of high voltage standard surface mount ceramic chip capacitors in NPO, X7R, X5R and Y5V dielectrics rated from 10 to 200 VDC. These High Voltage MLCs have barrier terminations and come in tape and reel packaging.
DWV = 1.5 X rated WVDC for ratings 500-999 WVDC, DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC
NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath capacitors. For more information see JDI Tech Note “Surface Arc Season”.
How to Order
Valid options are shown except for Capacitance
A typical PN is VPDD202W121K1GV001E. This part number breaks down as follows:
* Not all combinations create valid part numbers, ask our Apps Engineering Team for assistance creating a valid part number Request for assistance
Click below to see the new Global Part Number Reference Chart for this product
Subfamily
High Volt PME SMD ≥ 500V
High Volt PME SMD ≥ 500V
Size Multi-Layer Capacitor (MLCC)
0805
1206
1808
1210
1812
2220
2225
1825
Voltage
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
602 = 6000 V
Dielectric Temp Char
Class 1 Temp Compensating
NP0/C0G
Class 2 Hi-Dielectric Constants
X7R
Capacitance
Industry Std examples:
1 pF
15 pF
4,700 pF
+ Alpha Cap Codes
Special Code
3 numeric values in the voltage field - No "R" in the 3 digits - used for values greater than or equal to 10 pF
· 1st two digits are Signiant; third digit denotes number of zeros,
100 = 10 pF
101 = 100 pF
With "R" in the 3 digits - used for capacitance values less than 10pF
R = decimal point.
R75 = 0.75 pF
8R2 = 8.2 pF
Tolerance
±5%
±10%
±20%
Marking
No Mark
EIA Mark
Termination
Surface Mount
Ni/Sn (RoHS)
Ni/SnPb
Polyterm Sn (RoHS)
This specific product line is not for new designs. It will be phased out in 2022. There is an opportunity for our customers to place a lifetime buy by July 1, 2022. In some cases, we have agreements to continue supporting specific products. See the link below for the customer notification. eol-smt-web-notification.pdf
Johanson offers a wide range of standard surface mount ceramic chip capacitors in NP0, X7R, X5R dielectrics rated from 10 to 200 VDC. These MLCs have barrier terminations and come in tape and reel packaging.
General Specifications:
Case Sizes: 0201 - 1812
Rated Voltage: 10, 16, 25, 50, 100, 200 V
Dielectrics Type: NP0, X7R, X5R
Capacitance Range: 0.5 pF - 0.33 µF*
Note: * Capacitance values from 0.47 µF - 100 µF may be found in the Tanceram product section. For voltage ratings above 200 VDC see High Voltage, Safety Certified, Tip & Ring, and Special Size product listings.
Valid options are shown except for Capacitance
A typical PN is TDCF100W101K1GV001T. This part number breaks down as follows:
Capacitors Surface Mount < 201V, 0402, X7R, 10.0V, 1,000.00pF±10%, Ni/Sn (RoHS), 7" Reel Paper Tape
New Johanson Global Part Number Breakdown
* Not all combinations create valid part numbers, ask our Apps Engineering Team for assistance creating a valid part number Request for assistance
Click below to see the new Global Part Number Reference Chart for this product
Subfamily
Surface Mount < 201V
Size Multi-Layer Capacitor (MLCC)
0201
0402
0403
0504
0603
0805
1111
1206
1210
1808
1812
1825
2220
2525
2525
3838
Special
Voltage
Industry Std examples:
6.3V
200V
Special Code
3 numeric values in the voltage field - No "R" in the 3 digits - used for values greater than or equal to 10 Volts
1st two digits are Signiant; third digit denotes number of zeros,
100 = 10 Volts
101 = 100 Volts
402 = 4000 Volts
With "R" in the 3 digits - used for capacitance values less than 10 Volts
R = decimal point.
6R3 = 6.3 Volts
Dielectric Temp Char
Class 1 Temp Compensating
NP0/C0G
Class 2 Hi-Dielectric Constants
BX
X7R
X8R
Miscellaneous
Define in special code
Capacitance
Industry Std examples:
1 pF
15 pF
4,700 pF
+ Alpha Cap Codes
Special Code
3 numeric values in the voltage field - No "R" in the 3 digits - used for values greater than or equal to 10 pF
· 1st two digits are Signiant; third digit denotes number of zeros,
100 = 10 pF
101 = 100 pF
With "R" in the 3 digits - used for capacitance values less than 10pF
R = decimal point.
R75 = 0.75 pF
8R2 = 8.2 pF
Tolerance
NP0 <10pF
±0.05pF
±0.1pF
±0.25pF
±0.5pF
NP0 >10pF
±1%
±2%
±5%
±10%
±20%
X7R
±5%
±10%
±20%
Special Code
Marking
No Mark
EIA Mark
Cap Code & Tol
Special Code
Marking available on 0805 and larger sizes
Termination
Surface Mount
Ni/Sn (RoHS)
Ni/SnPb
Cu/Sn (RoHS)
Cu/SnPb
Polyterm Sn (RoHS)
Polyterm Sn/Pb
Surface Mount
Ni/Au (RoHS)
Pd Ag Strike (RoHS)
Pd/Ag (RoHS)
Pt/Ag (RoHS)
Double dip Pd (RoHS)
Special Code
Special Code
Default Catalog Item
Default for AEC Q200
1st special code
The special code is used to designate special (non-Catalog) performance requirements, testing, or physical dimensions.
Johanson Dielectrics is dedicated to providing the highest level of customer satisfaction through high quality components, superior customer service and forward looking, advanced products.